Materials and Processing (2018)
Materials and Processing is a discipline concerned with understanding the characteristics of materials and the processes used to convert materials into products. It includes biotechnology, environmental technology, materials, process engineering and innovation and technology management. The major in Materials and Processing includes properties and uses of materials, processing of these materials, and designing industrial systems.
To complete a major in Materials and Processing, students must gain 135 points including 105 points above 100 level in Materials and Processing, including at least 45 points above 200 level. It is recommended that students include ENGEN180, ENGEN112, ENGMP211, ENGME221, two other 200 level ENGxx papers (from the list of qualifying papers), ENGMP311, ENGCB321, and one other 300 level ENGxx paper (from the list of qualifying papers) in their programme of study.
Note: There will be no new enrolments in the Materials and Processing major (outside of existing guaranteed credit arrangements), Graduate Certificate or Graduate Diploma in 2018, however a new Materials Science subject is available. Students enrolled in Materials and Processing in 2017 or prior should consult the Faculty of Science and Engineering for programme advice.
On this page
- Prescriptions for the PGCert(Mat&Proc), PGDip(Mat&Proc), BSc(Hons), MSc, MSc(Research) and MSc(Tech)
- Prescriptions for the MEngPrac
- Prescriptions for the MPhil
- Prescriptions for the PhD
- 100 Level
- 200 Level
- 300 Level
- 400 Level
- 500 Level
- 800 Level
- 900 Level
Prescriptions for the PGCert(Mat&Proc), PGDip(Mat&Proc), BSc(Hons), MSc, MSc(Research) and MSc(Tech)
Students in masters degrees are normally required to take a thesis and a selection of papers. ENGME585 is compulsory for the MSc(Tech). Enrolment in papers towards the BSc(Hons) is only by invitation of the Chairperson. Candidates for these graduate qualifications should select their papers in consultation with the Chairperson of School.
To complete a BSc(Hons) in Materials and Processing, students must complete 120 points at 500 level, including at least 60 points from the papers listed for Materials and Processing, of which at least 30 points must be in research (normally ENGEN591).
Prescriptions for the MEngPrac
Students completing a Master of Engineering Practice are required to take a research project and a selection of papers. To complete a MEngPrac in Materials and Processing students must complete 180 points at 500 level, including ENGMP506, 30 points from EXMBM511, EXMBM512, EXMBM514, EXMBM521 and EXMBM522, 60 points from ENGCB523, ENGEN584, ENGEN585, ENGEN586, ENGEN587, ENGEV543, ENGEV545, ENGME515, ENGME557, ENGME585, and ENGMP513, as well as 60 points from ENGEN508.
Prescriptions for the MPhil
The Master of Philosophy is a one year research-based degree in which students undertake a programme of approved and supervised research that leads to a thesis which critically investigates an approved topic of substance and significance, demonstrates expertise in the methods of research and scholarship, displays intellectual independence and makes a substantial original contribution to the subject area concerned, and is of publishable quality.
Prescriptions for the PhD
The Doctor of Philosophy is a three year research-based degree in which students undertake a programme of approved and supervised research that leads to a thesis which critically investigates an approved topic of substance and significance, demonstrates expertise in the methods of research and scholarship, displays intellectual independence and makes a substantial original contribution to the subject area concerned, and is of publishable quality.
Code Paper Title Occurrence / Location ENGEN110 Engineering Mechanics 18B (Hamilton) This paper covers aspects of engineering mechanics. ENGEN112 Materials Science and Engineering 18B (Hamilton) Introduction to engineering materials (metals, ceramics, polymers, composites, semiconductors and biomaterials) and their atomic structure and mechanical properties. Includes; elastic and plastic deformation, fracture mechanisms, failure in service, iron-carbon phase diagram, redox reactions in corrosion, production of polymers, ce... ENGEN180 Foundations of Engineering 18A (Hamilton) Introduction to the engineering design process and computer aided design, fundamental principles of engineering analysis, open ended problem solving, engineering economics and the skills of a successful engineer. Includes a design-build-test experience.
Code Paper Title Occurrence / Location ENGCB223 Fluid Mechanics 18B (Hamilton) Basic principles of fluid statics and dynamics, including fluid viscosity, Bernoulli and mechanical energy equation, momentum analysis, dimensional analysis, flow in pipes and ducts, flow over bodies, and compressible flow. ENGCB224 Heat and Mass Transfer 18B (Hamilton) This paper covers the fundamentals of heat and mass transfer analysis, including conduction, heat convection, radiation, molecular diffusion and mass convection. Finned surfaces and heat exchangers are also covered. ENGCB280 Process Engineering Design 1 18B (Hamilton) This paper covers mass balances around reactors and separation processes used by engineers in process design, CAD tools for process flow diagrams, pipe and instrumentation diagrams, and simple batch and continuous process modelling using software tools. ENGEN270 Engineering Professional Practice 1 18A (Hamilton) Preparation for success in the engineering workplace including CV preparation, interview techniques, job seeking skills, online profile, workplace and engineering business cultures and norms, ethics, communication and management structures. ENGME221 Engineering Thermodynamics 18A (Hamilton) This paper covers the fundamental concepts and laws of thermodynamics, including thermodynamics properties of substances, first and second law analysis, power cycles, refrigeration cycles and simple combustion analysis of engines. ENGME280 Design and Manufacturing 1 18B (Hamilton) This paper covers the fundamentals of engineering design and manufacture. ENGMP211 Materials 1 18A (Hamilton) This paper will provide a foundation for understanding the relationship between material structure, processing and behaviour to support engineering of materials and engineering with materials. ENGMP213 Mechanics of Materials 1 18A (Hamilton) Stress and failure analysis of statically determinant and material systems under axial, bending and torsional loads, including beam deflections, buckling of struts, shear in joints, twisting in circular shafts and couplings.
Code Paper Title Occurrence / Location ENME351 Dynamics and Mechanisms 18B (Hamilton) This paper examines the application of kinetics and kinematics to mechanical systems and provides an introduction to 3-D dynamics. ENME352 Machine Dynamics and Control 18B (Hamilton) This paper covers vibrations of multiple degree of freedom systems, modelling and analysis for design improvements, vibration control, mathematical modelling, time, feedback and frequency response, control actions and controllers. ENME380 Mechanical Engineering Design 18B (Hamilton) Aspects of machine design and power transmission are covered. Engineering drawing and design techniques are further developed and applied through project work. The benefits and pitfalls of simulating mechanical designs are demonstrated and discussed. Electrical machines including DC, AC motors and solenoids are explained in a mecha... ENMP301 Special Topics in Technology 18A (Hamilton), 18B (Hamilton), 18S (Hamilton) & 18Y (Hamilton) An independent theoretical, literature or experimental investigation of a technological topic, supervised by a member of staff. ENMP311 Materials 2 18B (Hamilton) This paper advances knowledge presented in ENMP211 on structure, property, processing relationships fundamental to materials science and engineering. This paper includes microstructure modification, new materials and applications. ENMP313 Mechanics of Materials 2 18A (Hamilton) The scientific principles and relationships underlying mechanics and performance of materials. This paper covers stress and strain transformations, failure criteria, deflections and angle of twist, stress in bending fatigue and materials testing. ENMP321 Process Engineering and Design 18B (Hamilton) Advanced design and process technology for chemical, mineral, biological products and food processing. The principles of chemical and biological engineering, including designing production systems, process simulation, process economics, equipment design and separation technology. ENMP322 Biotechnology 18B (Hamilton) Industrial biotechnology, applications of enzymes and micro-organisms, principles of bioreactor and fermenter design and operation, industrial separations, and purifying biological material. ENMP323 Transport Processes and Unit Operations 18A (Hamilton) Application of heat and mass transport processes to common industrial equipment analysis, design and operation. ENMP325 Engineering Microbiology 18A (Hamilton) An introduction to the structure, physiology, ecology and taxonomy of bacteria, with reference to biochemical engineering. ENMP341 Environmental Technology 2 18A (Hamilton) Engineering systems available for environmental issues, including processing, using and protecting water resources, wastewater treatment and disposal, air and atmosphere science and technology, emissions control, energy technology and fuel science. ENMP381 Technological Innovation and its Management 18B (Hamilton) This paper consists of lectures, seminars, case studies and assignments covering a variety of topics dealing with industrial technology innovation.
Code Paper Title Occurrence / Location ENME440 Finite Element Analysis and Applications 18A (Hamilton) This paper explains the theory behind the Finite Element Method (FEM) and its application to solve engineering problems using a commercial software package. ENME451 Mechanics of Vibration 18B (Hamilton) Students will learn how to apply Newton's laws of motion and energy principles to complex mechanical systems including continuous systems and how to calculate natural frequencies and dynamic response of machines and machine components. ENME480 Advanced Product Development 18A (Hamilton) This paper explains the technologically driven changes affecting modern product development. It also teaches the most common rapid prototyping technologies and when to apply them. Examples of virtual engineering and simulation are demonstrated. Advanced manufacturing techniques are explained and demonstrated. ENMP407 Materials and Processing Elective 18A (Hamilton) & 18B (Hamilton) An advanced study in materials and processing. Possible options include: advanced composites; metals; bioseparation processing. Sub-topics include: available processing options; effect of material characteristics on processing parameters. ENMP411 Advanced Materials Engineering 18A (Hamilton) An advanced study of the relationships between processing and microstructure of engineering materials. Sub-topics include solidification, ceramic processing, joining and repairs of composite materials and powder metallurgy. ENMP413 Materials Performance in Service 18B (Hamilton) Students learn how to solve load and displacement problems using energy methods. Students will be introduced to plastic limit state analysis of structures. ENMP422 Advanced Process Simulation and Control 18A (Hamilton) Process dynamics, simulation and control and modern control systems, including open and closed loop, linear and non-linear systems, PID control, stability and tuning. It includes process simulation with commercial software packages. ENMP427 Biochemical Engineering 18A (Hamilton) This paper covers concepts of using biological materials for producing biomolecules, cell-based products and tissues, and carrying out transformations. It also incudes principles of downstream separation processes important in the bioprocess industries, modelling and costing such processes. ENMP442 Environmental Technology 3 18A (Hamilton) Topics in the engineering and science of water resources and water and wastewater treatment and management.
Code Paper Title Occurrence / Location ENGEN508 Master's Capstone Project 18A (Hamilton) & 18C (Hamilton) This paper requires students to carry out a theoretical or empirical investigation in a relevant subject/engineering discipline and write a report on the findings of the investigation. ENGMP506 Materials and Process Systems Analysis 18A (Hamilton) This paper covers the principles of materials and process engineering analysis. ENME540 Finite Element Analysis and Applications 18A (Hamilton) This paper explains the theory behind the Finite Element Method (FEM) and its application to solve engineering problems using a commercial software package. ENMP502 Special Topics in Engineering 1 18A (Hamilton) & 18C (Hamilton) No description available. ENMP503 Special Topics in Engineering 2 18A (Hamilton) No description available. ENMP504 Special Topics in Engineering 3 18B (Hamilton) & 18C (Hamilton) No description available. ENMP505 Special Topics in Engineering 4 18B (Hamilton) No description available. ENMP513 Advanced Material Properties and Performance 18A (Hamilton) No description available. ENMP514 Advanced Materials Processing 18A (Hamilton) No description available. ENMP515 CAD/CAM for Engineering 18A (Hamilton) No description available. ENMP516 Materials Characterisation 18B (Hamilton) No description available. ENMP542 Design for Energy and the Environment 18C (Hamilton) This interdisciplinary paper focuses on the important aspects of science and technology related to new and existing energy resources and energy efficiency. Topics covered reflect the trend of current development in energy technology. ENMP543 Environmental Technology Water and Wastewater 1 18A (Hamilton) No description available. ENMP544 Environmental Technology Water and Wastewater 2 18B (Hamilton) No description available. ENMP561 Bioprocessing 1 18A (Hamilton) Theory of protein purification and selected large-scale bioprocesses. ENMP563 Food Technology 1 18A (Hamilton) No description available. ENMP564 Food Technology 2 18B (Hamilton) No description available. ENMP568 Engineering Applied Practice 1 18B (Hamilton) No description available. ENMP569 Engineering Applied Practice 2 18A (Hamilton) No description available. ENMP585 Industrial Technology and Innovation 1 18A (Hamilton) No description available. ENMP586 Industrial Technology and Innovation 2 18B (Hamilton) No description available. ENMP590 Directed Study 18C (Hamilton) & 18D (Hamilton) Students have the opportunity to pursue a topic of their own interest under the guidance of academic staff. ENMP591 Dissertation 18C (Hamilton) A report on the findings of a theoretical or empirical investigation. ENMP592 Dissertation 18C (Hamilton) A report on the findings of a theoretical or empirical investigation. ENMP593 Materials and Processing Thesis 18C (Hamilton) An externally examined piece of written work that reports on the findings of supervised research. ENMP594 Materials and Processing Thesis 18C (Hamilton) An externally examined piece of written work that reports on the findings of supervised research. ENMP595 Materials and Processing Thesis 18C (Hamilton) An externally examined piece of written work that reports on the findings of supervised research. SCIE501 Research Methods in the Sciences 18B (Hamilton) This paper will enable students to develop the necessary communication skills and familiarity with research methods and practice to allow them to progress to the thesis component of a masters degree in the sciences, or to extend communication and research skills in those not taking a full research degree.
Code Paper Title Occurrence / Location ENMP800 Materials and Processing MPhil Thesis 18C (Hamilton) No description available.
Code Paper Title Occurrence / Location ENMP900 Materials and Processing PhD Thesis 18C (Hamilton) & 18D (Hamilton) No description available.
2018 Catalogue of Papers information current as of : 20 January 2020 2:00pm